Buy Now

Little Crow Gunworks LLC
6593 113th Ave NE, Suite C
Spicer, MN 56288
Telephone: 320-796-0530
E-mail Address:

Hours M-F 8:30am - 5pm CST

See our WFT
(World's Finest Trimmer)

World's Finest Trimmer

See our the RPP
(Roll Pin Pusher) here

RPP (Roll Pin Pusher)

See our newest product the GRX here

World's Finest Trimmer 2

Buy the WFT 2 online! view video demonstration below
$69.95 + shipping

The WFT 2 is our next generation of WFT trimmers. The two main improvements are the ability to trim up to 45 caliber and interchange trim chambers. The WFT 2 has a half inch shaft and requires a half inch chuck to drive it.

Buy NowThe feature most customers asked for was the ability to interchange trim chambers. After many prototypes and testing the perfect solution came from our friend, Jim Lambert. Instead of press fitting the trim chambers, like our original WFT, the trim chambers on our WFT 2 are a slight slip fit in bearing with a groove cut for an O-ring which creates a press fit.

Changing out trim chambers is accomplished by removing the cutter and pushing out the trim chamber with the knock-out dowel that is provided. Installing the trim chamber is accomplished by setting the trim chamber on a flat surface and steadily pushing the housing onto the trim chamber. Setting the cutter depth is easily adjusted by placing a “master case” in the trim chamber and sliding the cutter up to the case mouth and tightening down the set screws.

Trimming is just as precise and clean as with our original trimmer. The trim chamber selection on the WFT 2 is by specific cartridge, but still trims by case family-just order the largest chamber in the family that you intend to trim.

Click here to view the Instructions for Use for the WFT

Little Crow Gunworks World's Fintest Trimmer 2

web design by Dennis Benson