.300 WSM (Winchester Short Magnum Also Trims .270 WSM and 7mm WSM) Case Trimmer

.300 WSM (Winchester Short Magnum Also Trims .270 WSM and 7mm WSM) Case Trimmer

The WFT Rifle Brass Trimmer was developed as a precision case trimmer, built to last a lifetime. The WFT products trim bottleneck cartridge brass only. Our Case Trimmers are made to work with Full Length Sized Cases.

Our case trimmers use a power source that most people already own – a cordless or electric drill. Once adjusted to the user’s preference, it’s simply a matter of chucking it up in a drill and feeding cases in by hand.

STOP HERE IF YOU NECK SIZE - If you need a custom chamber fit for a neck size case DO NOT place your order online reference instruction at the bottom of the description.

• The Original WFT is designed to be caliber specific, each WFT is made to trim a specific cartridge or cartridge family (i.e. as a .308 trimmer will also trim 7mm-08, .260 Rem., .243 Win.) Reference our WFT Cross Reference Chart for cartridge families.
• We have more than 200 different reamers available and each trimmer is built to order, so if you desire something not listed, simply call or e-mail us for availability.
• The main parameters being that it is a bottle neck cartridge of .338 caliber or less.
• The razor sharp high-speed cutters and the sealed ball bearing we incorporate into our trimmers produce an extremely smooth cut. In most cases it will only be necessary to slightly chamfer the inner edge of the case mouth.
• The Original WFT was designed to fit a standard 3/8" drill chuck.
• Unlike other case trimmers the WFT does not use pilots, the case is supported by the shoulder and body of the case.
• The Original WFT Comes standard with a 3/8 " High Speed Steel cutter.

A pace of 10 cases per minute is pretty easily achieved.

IF YOU NECK SIZE

• Send us the following information along with 3 of your neck sized cases:
  • Your name and shipping address.
  • Note or letter including what product/s you would like to purchase.
  • Contact information including a phone number and email where we can contact you for billing to:

Little Crow Gunworks, LLC

6593 113 ^th Ave. NE

Suite C

Spicer, MN 56288

Once your cases are received we can modify the trimmer to fit your cases.

By doing it this way it will save you from paying $6.00 per trimmer for return shipping in the US.

For non-US customers that rate will be much higher.